The AT-VM95EN, features a Nude Elliptical Diamond. The construction of the stylus being a one piece diamond with a round shank inserted in the cantilever creates a lighter and more rigid transmission system than a diamond tip bonded on a round titanium shank such as in the AT-VM95E. Also the use of nude diamond implies a substantial difference in pricing, yet the quality of the reproduction will be immediately noticed, specifically in the fidelity of high frequencies and in the quality of the transient responses.
Key Features
- VM95 series Elliptical Nude stereo cartridge
- Aluminium cantilever
- 3.5mV output voltage
- Compatible body with all VM95 Series stylus assemblies
- 20 to 23,000Hz frequency response
Technical Specifications
| Model |
AT-VM95EN |
| Type |
VM Stereo Dual Magnet |
| Mounting |
1/2” centres |
| Frequency Response |
20 - 23,000 Hz |
| Channel Separation |
22 dB (1 kHz) |
| Output Channel Balance |
2.0 dB (1 kHz) |
| Output Voltage |
3.5 mV (@ 1 kHz, 5 cm/sec) |
| Vertical Tracking Angle |
23° |
| Vertical Tracking Force Range |
1.8 - 2.2g (standard 2.0 g) |
| Stylus Shape |
Elliptical |
| Stylus Size |
0.3 x 0.7 mil |
| Stylus Construction |
Nude Round Shank |
| Cantilever |
Aluminium Pipe |
| Coil Impedance |
3.3 kΩ (1 kHz) |
| Coil Inductance |
550 mH (1 kHz) |
| DC Resistance |
485 Ω |
| Static Compliance |
20 x 10 – 6 cm / dyne |
| Dynamic Compliance |
7 x 10 – 6 cm / dyne (100 Hz) |
| Wire Used for Coil |
T.P. Copper |
| Recommended Load Impedance |
47,000 Ω |
| Recommended Load Capacitance |
100-200 pF |
| Cartridge Weight |
6.1g |
| Dimensions |
17.2 x 18.9 x 28.3 ( H x W x D mm) |
| Replacement Stylus |
AT-VMN95EN |
What's Included
- Two 11 mm installation screws
- Two 8 mm installation screws
- Two washers
- Non-magnetic screwdriver
