ATW-R2100b receiver and ATW-T210b body-pack transmitter with BP892xcW MicroSet omnidirectional condenser headworn microphone. Includes element covers, windscreens, clothing clip, and dual-ear adapter kit.
The black ATW-2192XBI 2000-Series Earset Wireless Microphone System from Audio-Technica includes a 2000 Series frequency-agile True Diversity UHF beltpack transmitter, a BP892XcW MicroSet subminiature omnidirectional condenser headworn microphone, a 55" detachable cable with cW connector, an AT8464x dual-ear adapter kit, a cable clip, two foam windscreens, two AT8156 element cover/moisture guards, and a carrying case. They can be used when paired with a 2000 Series receiver (sold separately) to capture audio for live stage, television talent, lecturers, and worship leaders.
- ATW-T210a Wireless UniPak Transmitter
- BP892XcW Subminiature Omni Headworn Mic
- 10 Compatible User-Switchable Channels
- Detachable Cable with cW-Style Connector
- Dual-Ear Adapter Kit
- Includes Cable Clip
- 2 x Foam Windscreens
- Carrying Case
Technical Specifications
| Overall System |
| Operating Frequencies |
UHF
Band I : 487.125 to 506.500 MHz |
| Modulation Mode |
FM |
| Maximum Deviation |
±40 kHz |
| Frequency Response |
100 Hz to 15 kHz (+1 dB, -3 dB) |
| Operating Range |
100 m (300'), typical
Open range environment with no interfering signals. |
| Total Harmonic Distortion |
< 1% (at 1 kHz, ±20 kHz deviation) |
| Operating Temperature Range |
5º C to 45º C
41º F to 113º F
Battery and LCD performance may be reduced at very low temperatures. |
| Number Of Channels |
10 total |
| Handheld Transmitter |
| RF Power Output |
High: 30 mW; Low: 10 mW (switchable), at 50 ohms |
| Spurious Emissions |
Following federal and national regulations |
| Microphone Element |
Dynamic cardioid |
| Battery Type |
Two 1.5V AA alkaline (not included)
or two 1.2V AA NiMH (not included)
Recharging power for NiMH batteries (with ATW-CHG2)
U.S./Canada/Latin America: 3.2 V DC, 230 mA x2
Other world areas: 3.2 V DC, 320 mA x2 |
| Battery Life |
High: 7 hours (alkaline)
Low: 9 hours (alkaline)
Depending on battery type and use pattern. |
| Dimensions |
232.0 mm (9.13") long,
48.0 mm (1.89") diameter |
| Net Weight |
252 g (8.9 oz), without batteries |
| Accessories Included |
AT8456a Quiet-Flex™ stand clamp |
| Body Pack |
| RF Power Output |
High: 30 mW, Low: 10 mW (switchable), at 50 ohms |
| Battery Life |
High: 7 hours (alkaline)
Low: 9 hours (alkaline)
Depending on battery type and use pattern. |
| Battery Type |
Two 1.5V AA alkaline (not included)
or two 1.2V AA NiMH (not included)
Recharging power for NiMH batteries (with ATW-CHG2)
U.S./Canada/Latin America: 3.2 V DC, 230 mA x2
Other world areas: 3.2 V DC, 320 mA x2 |
| Dimensions |
66.0 mm (2.60") W x
22.5 mm (0.89") D x
92.3 mm (3.63") H |
| Input Connections |
Four-pin Locking Connector
Pin 1: GND
Pin 2: INST INPUT
Pin 3: MIC INPUT
Pin 4: DC BIAS +9V |
| Net Weight |
81 g (2.9 oz), without batteries |
| Spurious Emissions |
Following federal and national regulations |
| Receiver |
| Receiving System |
True diversity |
| Image Rejection |
60 dB nominal, 55 dB minimum |
| RF Sensitivity |
20 dBuV at 60 dB S/N ratio
(50 ohms termination) |
| Antenna Input |
BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each |
| Power Requirements |
12-18V DC, 500 mA |
| Dimensions |
210.0 mm (8.27") W x
162.2 mm (6.39") D x
44.0 mm (1.73") H
Not including BNC connectors or feet. |
| Weight |
1.0 kg (35.3 oz), without accessories |
