• The low-profile beige BP892xcH-TH condenser earset mic is built for intelligible, natural vocal reproduction, especially when improved gain before feedback over lavalier microphones is desired. The mic's omnidirectional polar pattern offers enhanced plosive protection with no proximity effect. 
• The bodypack transmitter features a rugged Hirose 4-pin cH-style connector, which provides secure connection to compatible lavalier mics, headworn mics, and cables.
• The transmitter's input accepts low-impedance microphone levels as well as high-impedance musical instrument or line levels. The gain ranges from -10 to +20 dB and can be adjusted in 2 dB increments.
• The bright OLED screen presents comprehensive setup and operating information, including battery indicator, mute status, and operating frequency. Setup functions are menu-driven via soft-touch controls, which are covered to prevent accidental changes.
• A tactile mute toggle switch (defeatable) provides physical confirmation of mute status when transmitter display is not visible.
• The transmitter easily syncs to the receiver via infrared with a quick press on the Sync button.
• Two RF power output settings are available: the low-level setting extends battery life while the high-level offers a stronger RF signal link.
• In case of interference, the programmable multifunction button on the transmitter can be used to switch to a clean, backup frequency with minimal interruption.
• The transmitter operates for up to 9 hours on two AA alkaline batteries and up to 9.5 hours on two rechargeable AA NiMH batteries.
• Charging terminals on the base of the transmitter work with the optional ATW-CHG3 charging dock or ATW-CHG3N networked charging dock to recharge AA NiMH batteries.
• The durable metal chassis is equipped with a field-replaceable whip antenna and a secure, locking battery compartment door.

• The wide 60 MHz UHF bandwidth gives you 2395 selectable frequencies to choose from for interference-free audio transmission in an increasingly congested RF environment.
• To prevent dropouts, the receiver's true-diversity reception compares incoming signals on two independent receiver circuits to ensure optimal RF quality.
• Auto-frequency scanning automatically selects the most appropriate frequency for the area in which the wireless is operating.
• Pre-coordinated frequency scan groups are available to simplify selection of usable frequencies in a multichannel wireless setup.
• The bright, dual-mode OLED display can be switched between two modes: the standard view provides continuous indication of RF signal strength, frequency, mute status, audio modulation level, and transmitter information, while the performance view highlights key metering.
• The display also shows the transmitter's battery life and mute status.
• Settings can be quickly adjusted using the control dial and BACK button located on the receiver's front panel. Settings can also be locked to prevent accidental changes.
• The BNC sockets for the two detachable antennas provide bias power to active remote antennas and other in-line RF devices.
• The ground-lift switch on the back panel helps eliminate audible hum caused by ground loops.
• One balanced XLR and one unbalanced 1/4" audio outputs let you connect the receiver to a mixing board or PA system.
• The half-rack receiver chassis can be mounted alone in a standard 19" rack using the included mounting brackets and screws.

• For Presenters and Performers
• BP892xcH-TH Omni Earset Mic
• Rugged Bodypack Transmitter
• True-Diversity Rackmount Receiver
• 2395 Auto-Scan Frequencies
• Selectable 10/30mW RF Power
• Dual-Mode OLED Display
• 9.5-Hour NiMH Battery
• Expandable to 40 Mic Channels/330' Range

Technical Specifications