The ES925/FM5 is a modular microphone system designed for professional sound reinforcement and other commercial sound applications. It includes a condenser microphone element, gooseneck, and a 5-pin flush-mount power module.
Each component is interchangeable with other ES modular microphone components, allowing you to mix and match power module types (XLR, FM3, FM5, DS5), gooseneck lengths (4.85", 9.08", 12.08", 15.08", 18.08", 21.08"), and microphone polar patterns (MicroLine®, hypercardioid, cardioid, omnidirectional).
The ES925/FM5 microphone’s low-profile element attaches to the small-diameter gooseneck, which offers highly flexible positioning while maintaining a well-contoured appearance. The included foam windscreen protects against plosives. The 5-pin flush-mount power module is equipped with a touch-sensitive capacitive-type user switch. For enhanced control in conference and boardroom installations, the unit’s external contact closure allows you to trigger an external device, such as a camera or the lighting, from the switch. The power module mounts unobtrusively in tabletops and comes with isolators that provide mechanical dampening of the mounting surface. Both the power module and the microphone element housing feature a highly visible, two-state RGB LED status indicator. UniGuard® innovations offer unsurpassed immunity from radio frequency interference.
Each component is interchangeable with other ES925 modular microphone components, allowing you to customize your build.
Key Features
- Modular microphone system includes a microphone element, gooseneck and power module each interchangeable with components from other ES Modular Microphones
- Flush-mount power module and element housing both feature a highly visible, two-state RGB LED status indicator
- Logic I/O capability permits control of remote devices from the power modules touch-sensitive capacitive-type user switch
- Power module with 5-pin XLR output mounts unobtrusively in tabletops
- Designed for professional sound reinforcement and other commercial sound applications
- Interchangeable condenser microphone elements provide full-range, natural sound
- Included isolators provide mechanical dampening of mounting surface vibration
- Available interchangeable elements permit angle of acceptance from 90° to 360°
- Small-diameter gooseneck design permits highly flexible positioning
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Includes foam windscreen
- Available in six lengths
Technical Specifications
| Microphones |
| Element |
Fixed-charge back plate, permanently polarized condenser |
| Frequency Response |
30-20,000 Hz |
| Open Circuit Sensitivity |
-40 dB (10.0 mV) re 1V at 1 Pa |
| Maximum Input Sound Level |
140 dB SPL |
| Dynamic Range |
112 dB |
| Signal-to-Noise Ratio |
66 dB |
| Phantom Power Requirements |
22-52V DC |
| Switches |
LED Color: mic on, mic off |
| Current Consumption |
7.6 mA |
| Weight |
ES925C6/FM5: 109 g (3.8 oz)
ES925C12/FM5: 133 g (4.7 oz)
ES925C15/FM5: 138 g (4.9 oz)
ES925C18/FM5: 143 g (5.0 oz)
ES925C21/FM5: 148 g (5.2 oz)
ES925C24/FM5: 153 g (5.4 oz) |
| Dimensions |
ES925C6/FM5: 38.0 mm (1.50") W x 48.0 mm (1.89") D x 207.6 mm (8.17") H
ES925C12/FM5: 38.0 mm (1.50") W x 48.0 mm (1.89") D x 315.0 mm (12.40") H
ES925C15/FM5: 38.0 mm (1.50") W x 48.0 mm (1.89") D x 391.2 mm (15.40") H
ES925C18/FM5: 38.0 mm (1. |
| Output Connector |
Integral 5-pin XLRM-type |
| Optional Interchangeable Elements |
ESE-Ca cardioid (120°), ESE-Ha hypercardioid (100°), ESE-MLa MicroLine® (90°), ESE-Oa omnidirectional (360°) |
| Audio-Technica Case Style |
M44 |
What's Included
- One pair of isolators
- Nut
- AT8109a foam windscreen
- Set screw (M2 x 2)
- Hex wrench
