The System 10 PRO ATW-1301 from Audio-Technica is a digital 24-bit/48 kHz wireless microphone system that operates on the 2.4 GHz ISM band and is used to capture audio for applications such as live stage, theater, DJ setups, and more.
The System 10 PRO features a half-rack chassis that allows you to mount one or two receiver units, however the receiver units can be released from the chassis and mounted remotely (up to 328' away) via Ethernet cable. Up to five chassis or 10 receiver units can be linked using a RJ12 cable, creating a multi-channel system with up to 10 channels.
In addition, other features include an easy-to-read display on each transmitter and receiver unit for quick setup, clear and natural-quality sound, and three levels of diversity, namely frequency, time, and space. Frequency Diversity sends the signal on two allocated frequencies, Time Diversity sends the signal in multiple time slots, and Space Diversity uses two antennas on each transmitter and receiver unit, thus to help maximize signal integrity.
The System 10 PRO Rack-Mount system includes an ATW-RC13 receiver chassis with rack-mount adapters, one ATW-RU13 receiver unit with corresponding AT8690 receiver unit mounting brackets, one RJ12 cable, one AC adapter, and one ATW-T1001 UniPak bodypack transmitter.
- Digital 24-bit/48 kHz Operation
- 2.4 GHz ISM Band
- Automatic Frequency Selection
- XLR and 1/4" Outputs
- Channel Selection, Sync, and Setup
- Three Levels of Diversity Assurance
- Easy-To-Read Display
- Can be Linked to Ten Receiver Units
- Receiver Units Can Be Mounted Remotely
- Ground-Lift Switch
Technical Specifications
Overall System |
Operating Frequencies |
2.4 GHz ISM band (2400 to 2483.5 MHz) |
Frequency Response |
20 Hz to 20 kHz Depending on microphone type |
Operating Range |
60 m (200') Open range env. with no interfering signals |
Total Harmonic Distortion |
<0.05% typical |
Operating Temperature Range |
0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures |
Handheld Transmitter |
RF Power Output |
10 mW |
Spurious Emissions |
Following federal and national regulations |
Battery Type |
Two 1.5V AA not included |
Battery Life |
>7 hours (alkaline) Depending on battery type and use pattern |
Dimensions |
254.8 mm (10.03") long, 50.0 mm (1.97") diameter |
Net Weight |
280 grams (9.9 oz) without batteries |
Accessories Included |
AT8456a Quiet-Flex™ stand clamp |
Body Pack |
RF Power Output |
10 mW |
Battery Life |
>7 hours (alkaline) Depending on battery type and use pattern |
Battery Type |
Two 1.5V AA not included |
Dimensions |
70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D |
Input Connections |
Four-pin Locking Connector Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V |
Net Weight |
100 grams (3.5 oz) without batteries |
Spurious Emissions |
Following federal and national regulations |
Receiver |
Receiving System |
Diversity (frequency/time/space) |
Maximum Output Level |
XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV |
Power Supply |
100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external |
Operating Temperature Range |
40° F (4° C) to 110° F (43° C) |
Dimensions |
209.8 mm (8.26") W x 44 mm (1.73") H x 169.3 mm (6.67") D |
Weight |
940 grams (33.2 oz) |
Accessories Included |
AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet |
Output Connector |
Remote Receiver Connector: RJ45 Link Connector: RJ12 |
What's Included
- Audio-Technica ATW-RC13 System 10 PRO Rackmount Chassis for ATW-RU13 Receivers
- AC Adapter
- RJ12 Link Cable
- Audio-Technica AT8631 Joining Plate for Two Wireless Receivers
- Rackmounting Hardware
- 4 x Rubber Feet
- Audio-Technica ATW-RU13 System 10 PRO Wireless Receiver Unit (2.4 GHz)
- 2 x Antennas
- AT8690 RU13 Holder
- Audio-Technica ATW-T1001 System 10 Digital Wireless Bodypack Transmitter (2.4 GHz)
- Belt Clip
- Gain Adjustment Screwdriver
- Limited 2-Year Warranty
- Power Supply
- AC Adapter
- Link Cable
- Rack-Mount Adapters
- Rubber Feet