• The System 10 PRO offers full-bandwidth, 24-bit/48 kHz digital audio with none of the audio artifacts associated with analog companding.
• The low-visibility, miniature MT830cW lavalier microphone features a Hirose 4-pin locking connector and delivers a natural sound optimized for speech intelligibility. The omnidirectional polar pattern ensures that the sound remains consistent, even when the speaker's head moves away from the mic.
• The rugged handheld transmitter features an integrated dynamic microphone capsule that delivers a natural sound optimized for speech intelligibility. The mic's hypercardioid polar pattern tightly focuses audio capture on the subject directly in front of the mic, minimizing background noise and feedback.

• Just power up the components, and the receiver automatically seeks out a clean frequency and pairs up with the transmitter, saving you the hassle of scanning and syncing.
• While in use, the system continually monitors activity in the 2.4 GHz Wi-Fi range and automatically switches to a clean frequency to avoid interference if necessary.

Rugged Receiver Chassis

• The durable half-rack receiver chassis houses both receiver units and can be mounted alone using the included mounting brackets and screws. Two chassis can be mounted side-by-side using the included joining plate, allowing four wireless mic channels to occupy a single 19" rackspace for a compact multichannel installation.
• The chassis' front-panel display provides visual status information including RF signal level and the transmitter's battery life, along with a 3-color audio-level LED and a Pair LED.
• A System ID number display indicates which transmitter is associated with a given receiver.
• Rear-panel connections include balanced XLR and unbalanced 1/4" output connections as well as output level controls and ground-lift switchs to help eliminate audible hum caused by ground loops.

Two Versatile Receiver Units

• Each receiver unit features two removable antennas.
• A 1/4"-20 thread allows for mounting each unit to a bracket, stand, and other fixture. The units can also be permanently wall mounted using the included receiver unit holders.

Lightweight Bodypack and Handheld Transmitters

• Both the bodypack and handheld transmitters are housed in lightweight, plastic chassis—the bodypack is equipped with a Hirose 4-pin locking connector and belt clip.
• Internal input trim controls can be set to match the sensitivity of your microphone or audio source for distortion-free input.
• With just a quick press, the transmitters' power switches double as mute functions. These can be locked out to prevent accidents.

Pairing Multiple Transmitters

• Up to 10 transmitters can be paired with a receiver ahead of time. This is useful in situations when you have multiple speakers, one after another, and you need to have them miked up and ready to go. All you'll have to do is turn one transmitter off and the next one on.

• Space Diversity: The receiver compares the signal showing up at its two antennas and chooses the strongest one.
• Time Diversity: The transmitter sends the digital signal in two imperceptibly different time slots and compares the two.
• Frequency Diversity: The digital audio is sent over two different frequencies at the same time and the system chooses the cleaner one.

For optimal performance, users are encouraged to maintain as direct a line of sight as possible between the transmitter and receiver.

2.4 GHz Wi-Fi Band

• Unlike traditional analog wireless systems, the System 10 PRO operates in the 2.4 GHz ISM band, away from interruptions and dropouts caused by TV and radio channel interference.

• For Two Presenters or Lecturers
• Lav Mic + Bodypack Transmitter
• Hypercardioid Handheld Mic/Transmitter
• 2 x Triple-Diversity Rackmount Receivers
• Receiver Link for Multichannel Setup
• Remote-Mountable Antennas
• 7 Hours on AA Batteries
• Expandable to 10 Mic Channels/200' Range

Technical Specifications

What's Included

• Audio-Technica ATW-1312/L System 10 PRO Dual-Channel Digital Wireless Combo Lavalier & Handheld Microphone System (2.4 GHz)
  
• Audio-Technica ATW-RC13 System 10 PRO Rackmount Chassis for ATW-RU13 Receivers
  2 x Audio-Technica ATW-RU13 System 10 PRO Wireless Receiver Unit (2.4 GHz)
  
• Audio-Technica ATW-T1002 System 10 Digital Wireless Hypercardioid Handheld Microphone/Transmitter (2.4 GHz)
  
• Audio-Technica ATW-T1001 System 10 Digital Wireless Bodypack Transmitter (2.4 GHz)
  
• Audio-Technica MT830cW Omnidirectional Lavalier Microphone for Wireless (Black, Hirose 4-Pin Connector)
  
• Audio-Technica AT8456a Quiet-Flex Microphone Stand Clamp for Wireless Transmitters
  
• 6 x Windscreens
  
• 2 x Tie Clips
  
• 2 x Screwdrivers
  
• 4 x Antennas
  
• 2 x AT8690 Receiver Unit Holders
  
• AC Power Adapter
  
• RJ12 Link Cable
  
• Receiver Joining Plate
  
• Rackmounting Hardware
  
• 4 x Rubber Feet