The AT-VM95ML, features a Nude Microlinear diamond, not only the Microlinear stylus will permit to double the duration of your stylus. The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material.
Key Features
- VM95 series Microlinear stereo cartridge
- Aluminium cantilever
- 3.5mV output voltage
- Compatible body with all VM95 Series stylus assemblies
- 20 to 25,000Hz frequency response
Technical Specifications
| Model |
AT-VM95ML |
| Type |
VM Stereo Dual Magnet |
| Mounting |
1/2” centres |
| Frequency Response |
20 - 25,000 Hz |
| Channel Separation |
23 dB (1 kHz) |
| Output Channel Balance |
1.5 dB (1 kHz) |
| Output Voltage |
3.5 mV (@ 1 kHz, 5 cm/sec) |
| Vertical Tracking Angle |
23° |
| Vertical Tracking Force Range |
1.8 - 2.2g (standard 2.0 g) |
| Stylus Shape |
Microlinear |
| Stylus Size |
2.2 x 0.12 mil |
| Stylus Construction |
Nude Square Shank |
| Cantilever |
Aluminium Pipe |
| Coil Impedance |
3.3 kΩ (1 kHz) |
| Coil Inductance |
550 mH (1 kHz) |
| DC Resistance |
485 Ω |
| Static Compliance |
20 x 10 – 6 cm / dyne |
| Dynamic Compliance |
10 x 10 – 6 cm / dyne (100 Hz) |
| Wire Used for Coil |
T.P. Copper |
| Recommended Load Impedance |
47,000 Ω |
| Recommended Load Capacitance |
100-200 pF |
| Cartridge Weight |
6.1g |
| Dimensions |
17.2 x 18.9 x 28.3 ( H x W x D mm) |
| Replacement Stylus |
AT-VMN95ML |
What's Included
- Two 11 mm installation screws
- Two 8 mm installation screws
- Two washers
- Non-magnetic screwdriver
