The original model of this stereo cartridge is the AT33ANV, which was available as a special release to celebrate our 45th anniversary. The A33ANV was the first in the AN33 series to feature a Duralumin cantilever, which received wide acclaim for its sound quality. Retaining the basic specification, we present a further improved and evolved model.
The A33EV is a ½ inch, standard mount 0.3 x 0.7 mil elliptical cartridge featuring a tapered Duralumin cantilever which reduces the effective mass of the cartridge, resulting in a more durable cantilever. The Dual Moving Coil cartridge design increases channel separation and extends the frequency response range delivering extraordinary audio quality. Internally constructed with a neodymium magnet enhances magnetic energy and PCOCC wire for pure audio transmission.
KEY FEATURES
- Elliptical stylus chip and durable duralumin tapered pipe cantilever
- 10O mid impedance specifications
- Dramatically increased magnetism with neodymium magnets and PCOCC as the coil
- High separation, wide-response dual moving coil
- VC Mold eliminates unnecessary vibrations
- "Hanenite" anti-vibration rubber eliminates unwanted vibrations
SPECIFICATIONS
- Type Dual Moving Coil
- Mounting 1/2" Centers
- Frequency Response 15 - 50,000Hz
- Body Material Aluminium/Synthetic Resin
- Channel Separation 30dB (1kHz)
- Output Channel Balance 0.5dB (1kHz)
- Output Voltage 0.3mV (1kHz and 3.54cm/sec.)
- Vertical Tracking Angle 23°
- Vertical Tracking Force Range 1.8 - 2.2g (2.0g standard)
- Stylus Shape Elliptical
- Stylus Curvature Radius 0.3 x 0.7 mil
- Stylus Construction Nude Square Shank
- Cantilever Duralumin
- Coil Impedance 10Ω (1kHz)
- Coil Inductance 22µH (1kHz)
- DC Resistance 10Ω
- Static Compliance 40×10-6cm/dyne
- Dynamic Compliance 10×10-6cm/dyne (100Hz)
- Terminal Pins Brass
- Recommended Load Impedance More than 100Ω (when head amp connected)
- Weight 6.9g
- Dimensions H16×W16.6×D26.5mm
- Accessories Included Non-magnetic screwdriver × 1, Washer × 2, Protector × 1, Cartridge installation screws 13 mm × 2 and 19 mm × 2, Nut × 2, Brush × 1, PCOCC lead set × 1