Audio-Technica ATW-1702 System 10 Camera-Mount Wireless Hypercardioid Handheld Microphone System (2.4 GHz)
S$769.00
- Current Stock:
- 0
- SKU:
- ATW-1702
- Connectivity:
- Wireless
ATW-R1700 receiver and ATW-T1002 handheld dynamic unidirectional microphone/transmitter. Includes AT8456a Quiet-Flex‚ stand clamp.
The Audio-Technica System 10 ATW-1702 is a digital wireless microphone system specifically engineered to meet the audio needs of vloggers, mobile journalists, and videographers. It provides an easy-to-operate solution with sophisticated technology to ensure reliability and high-quality audio for projects ranging from YouTube and wedding videos to corporate spots and interviews.
The ATW-1702 features a dynamic handheld transmitter/microphone with a hypercardioid pickup pattern for man-on-the-street interviews in noisy environments, along with a camera-mount receiver that connects to your DSLR or mirrorless camera via the included 3.5mm output cable. It operates anywhere in the world, transmitting 24-bit/48 kHz audio in the 2.4 GHz spectrum, well away from potential TV and radio interference.
This peer-to-peer system delivers three levels of diversity assurance—frequency, time, and space—for optimal performance at a range up to 100'. Just power up the components, and the receiver automatically seeks out a clean frequency and pairs up with the transmitter, saving you the hassle of scanning and syncing before a shoot. Up to eight wireless mics may be used on set at once.
Triple Diversity Technology for Reliable Performance
- Space Diversity: The receiver compares the signal showing up at its two antennas and chooses the strongest one.
- Time Diversity: The transmitter sends the digital signal in two imperceptibly different time slots and compares the two.
- Frequency Diversity: The digital audio is sent over two different frequencies at the same time and the system chooses the cleaner one.
- For optimal performance, users are encouraged to maintain as direct a line of sight as possible between the transmitter and receiver.
Rich with Features and Ready for Action
- The ATW-T1002 dynamic handheld microphone delivers a natural, broadcast-quality sound optimized for speech intelligibility. Its hypercardioid polar pattern helps to reject unwanted background sound, making it ideal in loud environments such as trade-show floors, busy public areas, or sporting events.
- The output level on the receiver can be reduced by 10 or 20 dB if you find you're overloading the input to your camera or recording device. The 3.5mm output can be switched to deliver either a balanced or unbalanced signal.
- Both the transmitter and receiver are housed in lightweight, plastic chassis. The included shoemount allows you to easily mount the receiver to your camera.
- With just a quick press, the power switch on the transmitter doubles as a mute function. This function can be locked out to prevent an accident.
- Conveniently, the receiver's LCD display shows critical information for the receiver as well as the transmitter—including battery status, signal level, mute status, and channel selection for both units.
- An additional 3.5mm output on the receiver allows you to monitor your signal while recording—helpful if your camera doesn't offer a headphone jack.
- The receiver features a rechargeable lithium-ion battery that provides up to 12 hours of operation. Using the included power adapter, the battery can be recharged via USB in about 4.5 hours, while in operation.
- On the transmitter's end, power is supplied by two AA batteries, giving you up to 7 hours of shooting time depending on battery type and usage.
- With this peer-to-peer system, you can only use one transmitter and one receiver at once. However, up to 8 transmitters can be paired with the receiver ahead of time. This is useful in situations when you have multiple speakers, one after another, and you need to have them miked up and ready to go. All you'll have to do is turn one transmitter off and the next one on.
- For hands-free interviews, you can add an MT830cW omni lavalier mic with an ATW-T1001 bodypack transmitter to your system.
Key Features
- Plug & Record Set for DIY Videographer
- Hypercardioid Handheld Transmitter/Mic
- Triple-Diversity Camera-Mount Receiver
- Protected Peer-to-Peer Connection
- Easy to Use, Flexible Operation
- Balanced Output & Headphone Output
- 7-Hr Batteries + USB Power
- Up to 8 Mics on Set / 100' Range
Technical Specifications
| Overall System | |
|---|---|
| Operating Frequencies | 2.4 GHz ISM band (2400 to 2483.5 MHz) |
| Frequency Response | 20 Hz to 20 kHz Depending on microphone type |
| Operating Range | 30 m (100') radius, 60 m (200') diameter typical Open range environment with no interfering signals |
| Total Harmonic Distortion | <0.05% typical |
| Operating Temperature Range | 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures |
| Audio Sampling | 24 bits / 48 kHz |
| Handheld Transmitter | |
| RF Power Output | 10 mW |
| Spurious Emissions | Following federal and national regulations |
| Battery Type | Two 1.5V AA not included |
| Battery Life | >7 hours (alkaline) Depending on battery type and use pattern |
| Dimensions | 254.8 mm (10.03") long, 50.0 mm (1.97") diameter |
| Net Weight | 280 grams (9.9 oz) without batteries |
| Accessories Included | AT8456a Quiet-Flex™ stand clamp |
| Body Pack | |
| RF Power Output | 10 mW |
| Battery Life | >7 hours (alkaline) Depending on battery type and use pattern |
| Battery Type | Two 1.5V AA not included |
| Dimensions | 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D |
| Input Connections | Four-pin Locking Connector Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V |
| Net Weight | 100 grams (3.5 oz) without batteries |
| Spurious Emissions | Following federal and national regulations |
| Receiver | |
| Receiving System | Diversity (frequency/time/space) |
| Maximum Output Level | 3.5 mm (1/8"), TRS balanced: +6 dBV Dual mono, unbalanced: 0 dBV |
| Power Supply | 100-240V AC (50/60 Hz) to 5V DC 0.5A switched mode external USB-type external power supply |
| Operating Temperature Range | 40° F (4° C) to 110° F (43° C) |
| Dimensions | 56.0 mm (2.20") W x 91.4 mm (3.60") H x 27.8 mm (1.09") D |
| Weight | 105 grams (3.7 oz) |
| Accessories Included | Two antennas; camera shoe mount; AC adapter (USB-type); USB cable; 3.5 mm (1/8") stereo cable |
| Battery Current/Life | 12 hours Depending on environmental conditions Battery Charging Time: 4 hours 30 minutes Depending on environmental conditions Charging Temperature Range: 5° C to +35° C (41° F to 95° F) |
| Battery Type | Internal Battery: 3.7V rechargeable Li-ion battery Battery Rating: 5.5 Wh 1,460 mAh |
What's Included
- Audio-Technica ATW-1702 System 10 Camera-Mount Wireless Hypercardioid Handheld Microphone System (2.4 GHz)
- Audio-Technica ATW-R1700 System 10 Digital Camera-Mount Wireless Receiver (2.4 GHz)
- Audio-Technica ATW-T1001 System 10 Digital Wireless Bodypack Transmitter (2.4 GHz)
- Audio-Technica ATW-T1002 System 10 Digital Wireless Hypercardioid Handheld Microphone/Transmitter (2.4 GHz)
- Audio-Technica AT8456a Quiet-Flex Microphone Stand Clamp for Wireless Transmitters
- Shoemount Adapter
- Belt Clip
- 3.5mm Output Cable
- USB AC Adapter
Warranty: 2 Years
