Audio-Technica VM540ML/H Dual Moving Magnet Stereo Cartridge With Microlinear Stylus And HS10 Headshell

Audio-Technica
S$389.00
Current Stock:
0
SKU:
4961310137649
Features:
Dual Moving Magnet

The VM540ML/H Headshell and Cartridge Combo Kit from Audio-Technica includes the VM540ML MicroLine dual moving magnet cartridge pre-mounted on the AT-HS10BK universal 1/2"-mount headshell. The VM540ML features dual magnets that are positioned to match left and right channels in the stereo record groove and improve channel separation, as well as extending the frequency response. Additionally, the cartridge employs a MicroLine stylus, which allows it to trace the record groove with superb accuracy, resulting in nuanced audio reproduction that elliptical and conical styli simply can't match. The stylus' multilevel shape also wears better than other styli, while reducing the wear on your records.

The lightweight AT-HS10BK is a universal 1/2"-mount headshell designed for 4-pin turntable cartridges. The die-cast aluminum body is designed to minimize vibration and provides a finger-lift at the front position to enable precise placement of the stylus onto the record. The gold-plated lead wires offer lossless signal transmission. The headshell ships with mounting hardware.

Key Features

  • VM dual magnet cartridge with MicroLine stylus
  • Aluminum cantilever
  • Paratoroidal coils improve generating efficiency
  • Center shield plate between the left and right channels reduces crosstalk
  • Durable low-resonance polymer cartridge housing
  • Universal 1/2"-mount headshell for 4-pin turntable cartridges
  • Includes VM540ML MicroLine Cartridge
  • Includes AT-HS10BK Headshell
  • VM Dual Magnet for Matched Left & Right
  • Increased Channel Separation
  • Record Groove Trace Accuracy
  • Frequency Response: 20 Hz to 27 kHz
  • Lightweight Aluminum Headshell
  • Gold-Plated Lead Wires
  • Reduces Vibration
  • Precise Stylus Placement with Lift

Technical Specifications

Cartridge & Stylus
Frequency Response 20 - 27,000Hz
Channel Separation 28dB (1kHz)
Vertical Tracking Angle 23˚
Vertical Tracking Force 1.8 to 2.2g (2.0g standard)
Stylus Construction Nude Square Shank
Recommended Load Impedance 47,000Ω
Coil Impedance 2,700Ω (1kHz)
Output Voltage 4.0mV (1kHz, 5cm/sec.)
Output Channel Balance 1.0dB (1kHz)
Stylus Shape Microlinear
Cantilever Aluminium Tapered Pipe
Static Compliance 40 x 10-6 cm/dyne
Dynamic Compliance 10 x 10-6 cm/dyne (100Hz)
Mounting 1/2” centres
Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Accessories Included Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2
Recommended Load Capacitance 100 – 200pF
Replacement Stylus VMN40ML
Stylus Size 0.12 x 2.2 mil
Type VM Type
Weight 16.8g

What's Included

  • Audio-Technica VM540ML/H Headshell and Cartridge Combo Kit with VM540ML and AT-HS10BK
  • 4 x Installation Screws
  • 2 x Washers
  • 2 x Hexagon Nuts
  • Non-Magnetic Screwdriver
  • Brush
  • Lead Wire Set