The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL
Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata.
Key Features
- VM95 Series dual magnet cartridge with 0.6 mil conical stylus
- Aluminium cantilever
- Specially wound coils increase output voltage
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
- 4.0mV output voltage
- Compatible body with all VM95 Series stylus assemblies
- Replacement for AT91, AT91R and CN5625AL
Technical Specifications
Model |
AT-VM95C |
Type |
VM Stereo Dual Magnet |
Mounting |
1/2” centres |
Frequency Response |
20 - 20,000 Hz |
Channel Separation |
18 dB (1 kHz) |
Output Channel Balance |
2.5 dB (1 kHz) |
Output Voltage |
4.0 mV (@ 1 kHz, 5 cm/sec) |
Vertical Tracking Angle |
23° |
Vertical Tracking Force Range |
1.8 - 2.2g (standard 2.0 g) |
Stylus Shape |
Conical |
Stylus Size |
0.6 mil |
Stylus Construction |
Bonded Round Shank |
Cantilever |
Aluminium Pipe |
Coil Impedance |
3.3 kΩ (1 kHz) |
Coil Inductance |
550 mH (1 kHz) |
DC Resistance |
485 Ω |
Static Compliance |
17 x 10 – 6 cm / dyne |
Dynamic Compliance |
6.5 x 10 – 6 cm / dyne (100 Hz) |
Wire Used for Coil |
T.P. Copper |
Recommended Load Impedance |
47,000 Ω |
Recommended Load Capacitance |
100-200 pF |
Cartridge Weight |
6.1g |
Dimensions |
17.2 x 18.9 x 28.3 ( H x W x D mm) |
Replacement Stylus |
AT-VMN95C |
What's Included
- Two 11 mm installation screws
- Two 8 mm installation screws
- Two washers